OEM Factory CO2 Welding Wire Er70s-6 Welding Wire Sg2 with Copper Coated

OEM Factory CO2 Welding Wire Er70s-6 Welding Wire Sg2 with Copper Coated

1.2mm 15kg/Spool OEM Factory CO2 Welding Wire Er70s-6 Welding Wire Sg2 with Copper Coated
CO2 MIG Wire Er70s-6/Sg2 Welding Wire
Factory CO2 Welding Wire Er70s-6 price
Er70s-6 Solid Solder Welding Wire/ MIG Welding Wire with Copper Coated
Sg2 Er70s-6 MIG Welding Wire
Er70s-6/Sg2 Copper Solid Solder Welding Wire made in china

Packaging:

1kg/spool,1spool/carton,500cartons/pallet

 5kg/spool, 1spool/carton, 250cartons/pallet

15kg/spool, 1spool/carton, 72cartons/pallet

 18kg/spool, 1spool/carton, 60cartons/pallet

20kg/spool, 1spool/carton, 50cartons/pallet

  250kg/drum, 4drums/pallet

  350kg/drum, 4drums/pallet

ER70S-6 welding wire is a low alloy steel gas shielded welding wire,protected with pure Co2 or Ar+CO2 gas.Stable arc,low spatters,excellent fabrication weldability and lowsensitivity of weld gas porosity can be obtained during welding.It is suitable for all position welding especially with large welding current range.It can show very good welding performance.

APPLICATIONS:
·Suitable for single-pass and multi-pass welding for structures fabricated by carbon steel and 500MPa grade low alloy steel,such as vehicles,bridges,construction and mechanical structures etc.

INSTRUCTIONS:
a.Suitable for using shielding gas at the speed of 20-25 liters per minute. 
b.Windshield must be set up in the welding zone,due to gas porosity may be caused by strong wind.
c.Wire extention should be 10-20mm if the current range is under 300A and if above 300A,20-25mm.

ER70S-6 welding wire is used to weld ship building steel(A,B,D,E,A36,D36,E36)and equivalent mild steel or 550Mpa grade mild alloy steel, such as container building, construction machine, railway construction, pressure vessel for semi-auto or automatic gas shielded welding.

Conform with:

GB/T ER50-6 DIN SG2 JIS YGW12

AWS ER70S-6 BS A18 EN G3Si1

Features &Application

1. It has excellent mechanical performance such as fast melting rate, high depositing efficiency, stable arc, little spatter, beautiful seam.

2. The slag is fluid and when hardened it is compact and easy to remove .

3. Welding of carbon steel, low alloy steel&500Mpa grade low alloy high intensity steel structures etc. Such as vehicle, building, bridge, ship building, pressure vessel industry and pipeline etc.

4. It is suitable for all position welding of steel sheets and irregular joints even under unfavorable conditions.

5. High-speed welding of light gauge plate and pipe line steel.

6. Certificates: ISO9001 ,SGS,CCS

   Shandong UTLET new materials Company Limited is located in Zhangqiu ,Jinan,Shandong,China.We are a intergrating R & D and sales of welding materials and service, such as Co2 mild steel welding wires, flux cored wires,submeraged arc welding wires,argon arc welding wires,stainless steel welding wires,high strength welding wire,and welding equipments.

   We are mainly in welding wires and equipments,and our products are enjoying good quality and price in Asia,Estern,Europe, North American,Africa Middle east area and so on. We contact strict quality control over each lot products.We will try our best to serve you by heart and soul.

Zander welding industry is widely applied to many fields,such as ships,vehicles,bridges,railway,engineering machinery,pressure vessels and buildings.We wil continue to provide clients with excellent service,reliable quality and competive price.