CTF-002 2way U-PVC motorized valve for industrial water treatment

CTF-002 2way UPVC motorized ball valve for industrial water treatment Actuator code:  CTF series

Product description:

PVC electric ball valve adopts the true union and flange connection, which can be installed easily without special tools. With the advantages of compact structure, anti-abrasion, quick detachable, easy repair and maintenance, etc. body material health and non-toxic, corrosion resistance, light weight, wide application. For example: water and raw water piping systems, drainage and sewage piping systems, salt water and sea water piping systems, acid and chemical solution systems and other industries.

Features:

operating temperature range:-40℃~+95℃

With excellent strength and toughness

With excellent chemical resistance capabilities

Retardant properties is the self-extinguishing

Low thermal conductivity,about1/200 of the steel

The content of heavy ion in the medium up to the ultrapure water standards.

Health indicators in line with national health standards.

Clean and smooth of the tube wall, which can generate a smaller friction and adhesion when transferring fluid.

Light weight, the equivalent of 1/5of steel, double union etc.

Easy to install, can be connected by flange, double union etc.

Excellent anti-aging and UV resistance, so that there is a great extension of the normal useful life than other piping systems.

Voltage:DC12V,DC24V, AC220V,
Torque output: 25 NM- 100NM
Working Pressure: 0-1.6 Mpa(16bar)
Temperature:0 to 100 Degree Celsius
Size Scope: ball valve,15-65(mm); butterfly valve 40-125(mm)
Open/Close time: 10 -- 25sec
Number of wires: 2-5 wires
Protection class :  IP67

Series CTF actuators with its smart design, wonderful shape, are suitable for many kinds of vavles. It has proved its superior quality for its stable nature, and good quality. These actuators are return type and suitable to DC or AC (will be set in the factory), can be controlled by outside cut off.  This actuator run low cost and does not need to be maintained.

 DC or AC (should be set in the factory), control mode is flexible, convenient to microprocessor and realize the automatic control by PLC.
 Manual/electrically operated integrated design, Simply to operate.
 Large output torque, inner protecting overheated device, working stable and reliable.
 Low noise, good leak-proof. Through the coupling, the valve will be installed and operated    easily.