Soloon Damper Actuator S6061SF-10DF/220V

 S6061SF-10/15 series fire smoke damper actuator

Summary:

The S6061SF-10/15Nm fire smoke damper actuators are designed specifically for application in the HVAC and light industrial markets. By the change of input signal, the actuator can be controlled at any point. It can supply a feedback signal of 0-10V, after cut the power, the actuator can return by the spring.

Features:

l  Control by 2/3 point or 0…10V

l  Shaft size up to 12* 12mm  

l  Two fixed auxiliary switches available

l  On/off type with manual function

l  Using fixed, compact and anti-impact steel shell

l  With IP54 standard

Technical datasheet:

 Note：The on/off type can match 72°C thermal sensor and modulating without manual function.

Notice: manual operation instruction

Insert the hand handle into the hex hole, smoothly and slowly turn around the handle by clockwise (or counter clockwise) rotation, according to the diagram of the product label. At the same time, the outputshaft will follow and turn by clockwise (or counter clockwise) rotation. When the outputshaft moves to the required position, then turn the handle conversely by counter clockwise  rapidly (or clockwise) with 90 ℃,（Should not use the manual lock while the turbine springs is bouncing back, otherwise, the fast reversing standstill locking part could bumps into the springs. And the result of manual lock-on system would be malfunctioned.）meanwhile the outputshaft will be blocked. Then turn slightly the handle by another clockwise (or counter clockwise), the outputshaft will move again.

[Attention]:Please do not operate manually when the actuator is speedly rebounding, otherwise it causes easily unlocking by manual or assembly damage.