Brand Name: LYTTE
Model Number: LTWH(R)-020---LTWH(R)-100
Place of Origin: china ,shandong
Geothermal Ground Source Heat Pump
Water Source Heat Pump
Water to Water Heat Pump
Heating Only
Heating+Cooling+Hot Water
Features:
APPLICATION
Used an area of 100m 2~ 1000m2 building. It can make free living hot water for demand as Villa, hotel, restaurant, factory,
theater, stadium, residential quarter, textile, food, medicine, metallurgy etc.
STRUCTURE
Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to
atmospheric agents.
HERMETIC COMPRESSORS
Use brand hermetic scroll compressor with built-in thermal overload cut-out and crankcase heater, mounted on rubber
vibration dampers. with low energy consumption, stable operation, and little vibration and low noise.
EVAPORATOR
High efficiency tube in tube or coaxial heat exchanger, factory insulated with flexible close cell material.
CONDENSER
High efficiency tube in tube or coaxial heat exchanger, factory insulated with flexible close cell material.
REFRIGERANT CIRCUIT
Copper tube connection with charge valves, filter, thermostatic expansion valve, gas-liquid separator, high pressure switch
and low pressure switch.T he heat pump units are complete also with 4-way valve and one way valve.
HYDRAULIC CIRCUIT
Built with user side and source side water inlet/outlet connectors, water discharge connectors.water discharge connectors,
air vent valve,
ELECTRIC PANEL
Consists of: Compressor contactor, Compressor protection breaker, User side water pump contactor (for mod.020÷100), User side water pump breaker (for mod. 020÷100), Microprocessor with function display.
OPTIONAL
Sight glass which must be installed in factory,
Source side water flow switch,
Source side water pump,
Anti-vibration rubber,
Metallic filter for the water circuit.
Desuperheater as optional
MODELS: LTWH(R)-020---LTWH(R)-100
Heating Capacity: 8.6-41KW
Cooling Capacity: 7.2-37KW
Model Specification:
LT WH (R) --- 020
LT-LVTE Company; WH-Scroll Compressor;
R-Units Type, R for Heat Pump(Heating and Cooling); 020-Model No.
Notes:
1.Cooling Standard Conditions:User side water inlet/outlet 12℃/7℃;Water source side inlet/outlet 30℃/35℃.
2.Heating Standard Conditions: User side hot water inlet/outlet 40℃/45℃;Water source side inlet/outlet 15℃/7℃;
3.Heat recovery equipments can be added for free sanitary hot water.
Notes:
1.Cooling Standard Conditions:User side water inlet/outlet 12℃/7℃;Water source side inlet/outlet 30℃/35℃.
2.Heating Standard Conditions: User side hot water inlet/outlet 40℃/45℃;Water source side inlet/outlet 15℃/7℃;
3.Heat recovery equipments can be added for free sanitary hot water.