Soloon Fan Coil Actuator and Valve

S6058/59 Fan Coil Actuator/Valve

Summary

The S6059 motorized valves are used to control the terminal waterway of air conditioners. They consist of thermostats that can control the motorized valves using speed-down devices and the reposition spring to turn the valves on and off so as to control the pipe and control the temperature automatically with the help of the air sent by the fan coil units.

Features

• Forged brass body and stainless steel base with aluminum case.
• Driven by fully-sealed synchronous motor with stainless steel reposition spring.
• Motor voltage: 220±10%VAC 50/60HZ
• Valve Type: Normally closed 2-way valve and

3-way diverting valve.

• Customized motor voltage and valve body connection type
• Valve can be easily installed and dismantled.

Specifications

• Power supply:  AC220v±10% 50/60HZ
• Power consumption: 6.5W
• Pressure: 1.6Mpa
• Separated valve:  open time:14~18s; close time:5~7s
• Embodied valve:  open time:8~12s; close time:3~5s
• Work condition: temperature around:5~40℃
• Pipeline water temperature: 5~90℃

Operation and Installation

1. Different pressure should be within the permitted range.
2. Position the valve to allow for easy maintenance.
3. Install the valve horizontally in locations free from moisture.
4. When installing the 2-way valve, the B end is for water to flow

in (with A and B marked under the valve).

When installing the 3-way valve, the medium will enter from under the valve (there is no sign at this end).

Note: End B is normally closed and end A is normally open. Connect end B to the main pipe and end A to the bypass pipe. (For installation refer to Fig. 5.)

Valve Body Sizes